Corporate | Railway | Industry
Language:   

Software

The supporting software, supplied by Nieaf-Smitt, to connect your test & measuring equipment to a PC, complies to the latest standards and user requirements.
 
To keep up with developments upgrades can be necessary. The downloads below are to adapt the functionality or your software to the latest versions.

 


NI305R digital multimeter, software

Communication software suitable for the NI305R digital multimeter.
 

 

E-test, installation testers, software

Communication software suitable for installation testers (Models: ERT-S, ELT-S, IRT-S, RCT-S) and the Combi Compact tester (Model: CMB-S). With this software it is possible to download and store data, rewrite and/or process in programmes such as WordTM, ExcelTM.
 

 

PHA3300 & PQA6600, power harmonics analysers, software

Communication software suitable for our Power Harmonics Analysers. The correct software for your tester depends of the current firmware version. To see what firmware version you currently have, turn on the power harmonics analyser and you will see the firmware version in the right bottom side of the display.
 
When your firmware version is below 4.0 you need the Powerlink software v1.57
 
When your firmware version is between 4.0 and 5.2 you need the Powerlink software v4.4
 
When your firmware version is 5.2 you need the Powerlink software v5.2
 
When your firmware version is 5.4 you need the Powerlink software v5.4
 
When your firmware version is 5.5 you need the Powerlink software v5.5
 

 

USB-to-serial cable & driver, Nieaf-Smitt

In case your tester is equipped with a serial output but your computer/notebook does not support serial communication, you need to use a serial-to-USB. We can supply a serial-to-USB cable (FTDI), click here for serial-to-USB cable.
 
For most computers/notebooks this cable works with  the 'plug-and-play' principle. In case you do need to install a driver to work with the serial-to-USB cable, see below.
 
Profilec USB Serial Converter drivers
 
FTDI USB Serial Converter driver
 

 

Signal Calibration Box (SCB)

Software suitable for the Signal Calibraton Box (SCB). Depending of your version you can download the software and manual via one of the following links:
  
SCB-V2.1

 

Mors Smitt Group worldwide

 
Regional sales offices
Mors Smitt B.V.
Vrieslantlaan 6
3526 AA Utrecht
The Netherlands
T: +31 30 288 1311
Mors Smitt Asia Ltd.
21/F., 9 Des Voeux Road West
Sheung Wan, Hong Kong
T. +852 2343 5555
RMS Mors Smitt
6 Anzed Court
Mulgrave,VIC 3170
Australia
T: +61 (0)3 8544 1200
Mors Smitt France SAS
2 Rue de la Mandinière
72300 Sablé-sur-Sarthe
France
T: +33 243 92 8200

Mors Smitt Technologies Inc.
1010 Johnson Drive
Buffalo Grove, IL 60089-6918
USA
T. +1 847 777 6497
Mors Smitt UK Ltd.
Graycar Business Park
Barton under Needwood
Burton on Trent
Staffordshire
DE13 8EN
United Kingdom
T: +44 1283 722650
Local sales & support offices
Mors Smitt Sales & Support - Brazil
Sao Paolo, Brazil
Mors Smitt Sales & Support - Gulf Region
Abu Dhabi, United Arab Emirates
Mors Smitt Sales & Support - Malaysia
Kuala Lumpur, Malaysia
Mors Smitt Sales & Support - China
Zhongshan, P.R. China
Mors Smitt Sales & Support - India
Bangaluru, India


© Mors Smitt 2017