Products
- Rolling stock
- Relays
- Dry circuit relays
- Instantaneous relays
- Latching relays
- Monitoring relays
- Time delay relays & Flashing relays
- Safety critical relays
- Sockets
- Miscellaneous
- Protection relays
- Hall effect sensors
- Miniature circuit breakers
- Traction energy management
- Integrated electrical solutions
- Panel indicators
- Door control units
- Signalling & Infrastructure
- Signalling relays
- Miniature circuit breakers
- Safety critical relays
- Protection relays
- Hall effect sensors
- Retrofit & replacement solutions
- Maintenance & test equipment
Sockets
COR MT / COR NZ socket
- COR MT connection with solder lug terminals
- COR NZ connection with printed circuit terminals
- For panel mount for COR MT
- Printed circuit board mount for COR NZ
- Spring lock
- COR MT, COR NZ suitable for all 2301 relays
- -25 °C...+70 °C operating temperature
COR NJ relay socket
- Rear connection, with single faston 5 mm
- No internal soldering / connections
- For panel mount
- Wire locking spring
- COR NJ suitable for all C-relays and modules (C, SC, CM)
- -40 °C...+80 °C operating temperature
COR NK / COR PA / COR SA Relay socket
- Rear connection, with single faston 5 mm
- No internal soldering / connections
- For panel mount
- Spring lock
- COR NK, COR PA suitable for all 300 series relays (303, 310 relays)
- COR SA suitable for all 303S relays
- -40 °C...+80 °C operating temperature
COR NO / COR NO CI socket
- COR NO connection with solder lug terminals
- COR NO CI connection with printed circuit terminals
- COR NO for panel mounting
- COR NO CI for PCB mounting
- Spring lock
- Suitable for 3001 relays
- -25 °C...+70 °C operating temperature
COR NU / COR NU CI socket
- COR NU connection with solder lug terminals
- COR NU CI connection with printed circuit terminals
- COR NU for panel mounting
- COR NU CI for PCB mounting
- Spring lock
- Suitable for 3301 relays
- -25 °C...+70 °C operating temperature
COR OU relay socket
- Rear connection, with single faston 5 mm
- No internal soldering / connections
- For panel mount
- Spring lock
- COR OU suitable for all 401 and 407 relays
- -40 °C...+80 °C operating temperature
EA 112 relay socket
- Rear connection, with crimp contacts
- No internal soldering / connections
- For panel/flush mount
- Wire locking spring
- EA 112 A suitable for all A series relays and modules (A 400, AK, AM, AG, TALOR, TAC)
- EA 112 B suitable for all B series relays (B 400, BK, BM, BG, TBBU)
- -40 °C...+80 °C operating temperature
EA102 relay socket
- Rear connection, with double faston 5 mm
- No internal soldering / connections
- For panel mount
- Locking bracket or wire locking spring
- EA 102A suitable for all A series relays and modules (A 400, AK, AM, AG, TALOR, TAC)
- EA 102B suitable for all B series relays (B 400, BK, BM, BG, TBBU)
- -40 °C...+80 °C operating temperature
EA103 relay socket
- Front connection, with screw terminals
- No internal soldering / connections
- For surface or optional 35 mm rail mount
- Wire locking spring
- EA 103 AF suitable for all A series relays and modules (A 400, AK, AM, AG, TALOR, TAC)
- EA 103 BF suitable for all B series relays (B 400, BK, BM, BG, TBBU)
- -40 °C...+80 °C operating temperature
EA104 relay socket
- Rear connection, with single faston 5 mm
- No internal soldering / connections
- For panel mount
- Locking bracket or wire locking spring
- EA104 A suitable for all A series relays and modules (A400, AK, AM, AG, TALOR, TAC)
- EA104 B suitable for all B series relays (B400, BK, BM, BG, TBBU)
- -40 °C...+80 °C operating temperature
EA105 relay socket
- Front connection, with single faston
- No internal soldering / connections
- For surface or optional 35 mm rail mount
- Wire locking spring
- EA 105 AF suitable for all A series relays and modules (A 400, AK, AM, AG, TALOR, TAC)
- EA 105 BF suitable for all B series relays (B 400, BK, BM, BG, TBBU)
- -40 °C...+80 °C operating temperature
V10 socket - Screw terminal, wall mount
- Surface / wall mount
- Optional 35 mm rail mount with A109 rail clip
- Sturdy screw terminals
- Space saving
- Suitable for all CU relay series
- Up to two wires of 1.8 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V11 socket - Screw terminal, wall mount, protection diode
- Surface / wall mount
- Optional 35 mm rail mount with A109 rail clip
- Sturdy screw terminals
- Back EMF protection diode
- Space saving
- Suitable for all CU relay series
- Up to two wires of 1.8 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V12 socket - Screw terminal, wall mount, 4 kV insulation
- Surface / wall mount
- Optional 35 mm rail mount with A109 rail clip
- Sturdy screw terminals
- 4 kV insulation between coil and contacts
- Space saving
- Suitable for CU-U200/300-U relay series only
- Up to two wires of 1.8 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V13 socket - Screw terminal, wall mount, diode and LED
- Surface / wall mount
- Optional 35 mm rail mount with A109 rail clip
- Sturdy screw terminals
- Back EMF protection diode
- LED indicator
- Space saving
- Suitable for all CU-U200/300-U relay series only
- Up to two wires of 1.8 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V14 socket - PCB mount
- PCB mount
- Space saving
- Suitable for all CP relay series
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V17 socket - Spring terminal, wall / rail mount
- Surface / wall and 35 mm rail mount
- Spring clamp terminals
- Integrated retaining clip
- Space saving
- Suitable for all CU relay series
- Up to two wires of 2.5 mm2 per connection terminal
- Positive mechanical keying
- Optional diode or double zener protection device
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V22BR socket - Screw terminal, wall mount
- Surface / wall mount
- Sturdy screw terminals
- Suitable for 9 mm ring tabs
- Suitable for all D-U relay series
- Up to two wires of 2.5 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V23 socket - Screw terminal, wall/rail mount
- Surface / wall and 35 mm rail mount
- Sturdy screw terminals
- No internal solderings / connections
- Touch proof IP20
- Height saving 35 mm rail mounting
- Suitable for all D-U relay series
- Up to two wires of 2.5 mm2 per connection terminal (7.5 mm wide tabs)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V23BR socket - Screw terminal, rail mount
- 35 mm rail mount
- Sturdy screw terminals
- Suitable for 9 mm ring tabs
- Height saving 35 mm rail mounting
- Suitable for all D-U relay series
- Up to two wires of 2.5 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V24 socket - Faston terminal, wall mount
- Surface / wall mount
- Sturdy faston terminals
- Space saving
- Suitable for all D-U relay series
- 1 faston 6.3 x 0.8 mm or 2 faston 2.8 x 0.8 mm
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V25 socket - Faston terminal, rail mount
- 35 mm rail mount
- Sturdy faston terminals
- Space saving
- Suitable for all D-U relay series
- 1 faston 6.3 x 0.8 mm or 2 faston 2.8 x 0.8 mm
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V26 socket - Crimp terminal, panel mount
- Panel mount
- Crimp contacts
- Space saving
- Suitable for all D-U relay series
- Positive mechanical keying
- Clear terminal ID
V29 socket - Spring clamp terminal, wall/rail mount
- Surface / wall and 35 mm rail mount
- Sturdy spring clamp terminals
- Twin connection per relay contact
- No internal solderings / connections
- Touch proof IP20
- Height saving 35 mm rail mounting
- Suitable for all D-U relay series
- Easy & quick installation (up to 75% reduction of wiring time)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V3 socket - Soldering terminals, panel mount
- Panel / flush mount
- Sturdy soldering terminals
- No internal connections
- Space saving
- Suitable for all D-U relay series
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V31 socket - Faston terminal, panel mount
- Panel mount
- Sturdy faston terminals
- Space saving
- Suitable for all D-U relay series
- Up to two faston connections of 4.8 x 0.8 mm
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V32 socket - PCB mount
- PCB mount
- Space saving
- Suitable for all D-U relay series
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V33 socket - Spring clamp terminal, panel mount
- Panel / flush mount
- Sturdy spring clamp terminals
- Twin connection per relay contact
- Suitable for all D-U relay series
- Easy & quick installation (up to 75% reduction of wiring time)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V88 socket - Spring clamp terminal, panel mount 8 pole
- Panel / flush mount
- Sturdy spring clamp terminals
- Twin connection per relay contact
- Suitable for all D8 and KDN relay series
- Easy & quick installation (up to 75% reduction of wiring time)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V89 socket - Faston terminal, panel mount 8 pole
- Panel mount
- Sturdy faston terminals
- Space saving
- Suitable for all D8 and KDN relay series
- Up to two faston connections of 4.8 x 0.8 mm
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V92BR socket - Screw terminal, wall mount 8 pole
- Surface / wall mount
- Sturdy screw terminals
- Suitable for 9 mm ring tabs
- Suitable for all D8 and KDN relay series
- Up to two wires of 2.5 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V93 socket - Screw terminal, wall/rail mount 8 pole
- Surface / wall and 35 mm rail mount
- Sturdy screw terminals
- No internal solderings / connections
- Touch proof IP20
- Height saving 35 mm rail mounting
- Suitable for all D8 and KDN relay series
- Up to two wires of 2.5 mm2 per connection terminal (7.5 mm wide tabs)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
V93BR socket - Screw terminal, rail mount 8 pole
- 35 mm rail mount
- Sturdy screw terminals
- Suitable for 9 mm ring tabs
- Height saving 35 mm rail mounting
- Suitable for all D8 and KDN relay series
- Up to two wires of 2.5 mm2 per connection terminal
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V94 socket - Faston terminal, wall mount 8 pole
- Surface / wall mount
- Sturdy faston terminals
- Space saving
- Suitable for all D8 and KDN relay series
- 1 faston 6.3 x 0.8 mm or 2 faston 2.8 x 0.8 mm
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V95 socket - Faston terminal, rail mount, 8 pole
- 35 mm rail mount
- Sturdy faston terminals
- Space saving
- Suitable for all D8 and KDN relay series
- 1 faston 6.3 x 0.8 mm or 2 faston 2.8 x 0.8 mm
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V96 socket - Soldering terminals, panel mount, 8 pole
- Panel / flush mount
- Sturdy soldering terminals
- No internal soldering connections
- Space saving
- Suitable for all D8 and KDN relay series
- Positive mechanical keying
- Bifurcated female receiver for tight grip relay pin
- Clear terminal ID
V97 socket - Crimp terminal, panel mount, 8 pole
- Panel mount
- Crimp contacts
- Space saving
- Suitable for all D8 and KDN relay series
- Positive mechanical keying
- Clear terminal ID
V99 socket - Spring terminal, wall / rail mount, 8 pole
- Surface / wall and 35 mm rail mount
- Sturdy spring terminals
- No internal solderings / connections
- Touch proof IP20
- Height saving 35 mm rail mounting
- Suitable for all D8 and KDN relay series
- Up to two wires of 2.5 mm2 per relay contact
- Easy & quick installation (up to 75% reduction of wiring time)
- Positive mechanical keying
- Trifurcated female receiver for tight grip relay pin
- Clear terminal ID
    |
Toolkit
 |
 |
 |
 |
