In stock

Installationtesters

Instaltest XE Combination installation tester

626000821
Summary

The Instaltest XE is a simple and compact installation tester combining
EN 61010 and EN 61557. The tester has a huge number of integrated
features, each driven by separate accessories.

The user selects a measurement easily using the rotary switch. The
selected test is also clearly displayed in the large LCD display. Trip time
and contact current of the RCD, impedance testing, insulation resistance
and phase sequence are some of the functions.

Measurements

  • Insulation resistance
  • Continuity
  • Contact voltage
  • Trip time of RCD
  • Automatic RCD test
  • Trip current of RCD
  • Earthloop impedance without tripping RCD
  • Phase rotation
  • Line impedance (Z-line)
  • Earthloop impedance (Z-loop)
  • Voltage

Specifications

Functies    
Insulation resistance
50, 100, 250, 500 and 1000 V
0.00...999 MΩ
Continuity
Test current 200 mA (LPE, NPE)
0.00...1999 Ω
Nominal voltage 93...266 V / 45...65 Hz
RCD trip current 10, 30, 100, 300, 500, 1000 mA
RCD contact voltage 0.0...99.9 V
Test current < 0.5 x IΔn
RCD trip time 0...999 ms
Test current RCD 0.5 xIΔn / 1x IΔn / 2x IΔn / 5x IΔn
Type RCD G, S, PRCD
Current type AC / A / F
Loop 0.00...9.99 kΩ
Line 0.00... 9.99 kΩ
Voltage 0...550 V
Frequency 0.00...999.99 Hz
Phase rotation 100...550 VAC
General    
PC interface USB/RS232
Overvoltage category CAT III 600 V
Protection IP40
Supply 6xLR06 AA batteries
Dimensions 230 x 115 x 103 mm
Weight 1.3 kg (excl. batteries)
Including Manual, strap, RS232 and USB cable, InstalLink Pro software. quickstart manual. rechargeable batteries, charger, alligator clamps
FAQ
Hoe kom ik het instellingen menu?

Houd de verlichtingstoets linksonder naast het beeldscherm ingedrukt en draai de keuze schakelaar welke aan de rechterzijde van het beeldscherm zit een positie.

Mijn USB aansluiting werkt niet

Controleer of de tester ingesteld staat op USB of RS232 in het instellingen menu van de tester. Houd de verlichtingstoets linksonder naast het beeldscherm ingedrukt en draai de keuze schakelaar welke aan de rechterzijde van het beeldscherm zit een positie. Ga vervolgens naar INSTELLEN COMM. Met de pijltjestoetsen en druk op de TEST knop, de aansluiting waar een > symbool voorstaat is als actief ingesteld.


Product information request

Railway rolling stock
Railway signalling
Industry
Energy
Instruments
Maritime
Yes
Yes